2008 Chevrolet Express "power fuse turn signal brake" Questions

fuse box under driver seat no power there for brake light turn signal right side Body Control Module (BCM) is located in the Lower right side of the instrument panel behind the knee bolster ! It's not

...turn signal lights but no tail lights? All lights and wiring are new. Check for power at the splice/connector. Also check fuses as it should have different fuses for trailer lighting. Also Try this ...

power from a 3 fuse and flasher for the side that the turn signal is called for. If I typed to fast let me know. I can answer any questions you might have. If this helped you please vote 4 thumbs up.

...POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT ...

...fuse has power on it. This is one of those fuses that are hot at all times-as long as battery is connected, voltage should be going through the fuse and up to the brake light switch. Check for power ...

fuse shows power at both ends, move tester to the brake light switch and check for power at the switch-this wire to brake switch is again "hot at all times". Should have power in, and when brake pedal

...fuse has power if the hazards work. The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch. Do you have power going into the turn signal ...

...power to the 'pnl' fuse (5amp). All bulbs are good. the problen is probably the turn signal switch with a test light check for power at brake switch if no power check for power at turn signal switch ...

...power to fuse for these lights?, you need to test all lights with a test light first to determine if there is power or not and where the power stops, you can run a temporary wire to any of these ...

...power at the fuse terminals. you'll check from ground to the terminal on top of the fuse. you should have 12vdc. then , check for power at your brake light switch on both terminals while the brake ...