Question about Mitsubishi Outlander
reset change oil light on mitsubishi Turn the key off. Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed. Press and hold the "info" button
RESET button until the service indicator light appears. Press the SET/ RESET button repeatedly to scroll the service menu. With the oil change interval highlighted, press and hold the SET/RESET button
...Don't start it. Press the button to change the odometer reading three times until it says oil life and hold the button for ten seconds and you will hear a chime letting you know it's been
...reset" button for a few seconds and YOU'RE GOOD TO GO! and you can also change the miles in between the "check oil light," once at the screen just use the "left/right" buttons and make it go ...
...reset the oil monitor by pressing driver information center SELECT button for 5 seconds while Engine Oil Life is displayed . Turn the ignition on with engine off depress the gas pedal slowly 3 times ...
...the seek button until you see tire mon then push and hold tune button again until message reads reset then scroll back through with seek button until you see exit hold tune button again and your ...
...reset button is on the fuse block Don't quote me on this but that is were GM always had them.....If it is there turn the ignition key to the ON position and press & hold the button in for 15 ...
Question about Mitsubishi Outlander
...changing oil? you should be able to reset in the vehicle information screen go to were it shows % of oil life left and then hold down the button with check symbol for about 5 seconds it should ...
...to put it, in n, put emer brakes on and hit reset button but that does not work any ideas Turn the key to the on position with the engine off. Push the gas pedal to the floor three times in 5
210 questions posted
Usually answered in minutes!
561 Questions
200 Questions
152 Questions
107 Questions
83 Questions