...cap, if equipped Locking hub or hub drive flange, if equipped Brake caliper and rotor Front wheel --- Go to your local auto parts store or library to get a copy of the repair manual for this
Question about Chevrolet Silverado
...auto parts stores will lend you this socket. A 1/2-inch drive air impact wrench or breaker bar is necessary to remove the nut.6. Remove wheel bearing/hub assembly from spindle. It easily comes off by ...
...wheel nut removal socket at most auto parts stores - you will have to have an automotive shop with a bearing press to remove and replace the wheel bearing ($30-$60) - if the caliper is seized - ...
...Auto 4 wheel drive? I can not get the rotor to come off. I know that the hub must come with it. However, I am not sure what I have not removed in order to free up the hub. Section 05-03C: Wheel Hubs ...
...wheel bearing is it hard to do on 2002 alero its actually pretty easy if you have the basic tools needed and a little mechanical knowledge, because i dont think you can buy just the bearing at a auto ...
Question about Chevrolet Silverado
...Auto Zone and they check it. Problem is speed sensors are going out on both wheels. Assuming that you're talking about the front wheel speed sensors...Your best bet is to replace both from wheel ...
Question about Saturn Cars & Trucks
auto repair how to replace a rear wheel bearing in this type of car? This would be a bolt on hub and bearing assembly. You will remove the wheel and the brake rotor or drum. Then unplug the abs sensor
...wheel bearing hub assembly metal,plastic,splined,washer if you have 3 bolt auto hubs the washers go on right after the cam assembly the part with the nylon on the back it also has a spring around ...
...wheel nut removal socket at most auto parts stores - you will have to have an automotive shop with a bearing press to remove and replace the wheel bearing ($30-$60) - if the caliper is seized - ...
...auto 4wd hubs? I have removed, re-packed and replaced rear wheel bearings before, but never fronts or messed with 4wd hubs. No, but I would replace the rotors. Turning them usually winds up getting ...
1,191 questions posted
Usually answered in minutes!
1,100 Questions
556 Questions
393 Questions
396 Questions
296 Questions