2000 GMC Sierra "remove plastic old thermostat cover" Questions

Ad

...plastic cover/panel located under the dash board on the passenger's side. (only a few 4-5 smalls screws) Removal will enable you to see the on/off switch/gate moving/rotating as you turn the knob to ...

Ad

...remove plastic cover over engine and then remove the 2 bolts that hold the thermostat cover down, replace the thermostat exactly as the old one came out, refill the system with the bleeder ...

Ad

...remove o-ring and thermostat5. If plastic crossover/thermostat housing like original intake manifold,then inspect    for cracks if plastic is cracked you need new improved intake with ...

What size tools will I need to remove the old thermostat on the 2006 Hyundai elantra? the two nuts are 12mm just pull back the plastic cover over the housing its that easy.

Question about GMC Sierra

3 Answers

...REMOVE WATER PUMP DRIVE BELT COVER.THE WATER PUMP A ROUND THING WITH NOTCHES ALL AROUND IT.YOU NEED A REMOVER AND INSTALLER TOOL NUMBER J - 38816 WATER PUMP TORQUE IS 73 FT LBS WATER PUMP COVER BOLTS ...

...remove all of the old gasket material using a plastic scraper so you don't scar the metal and create a leak. Make sure the gasket pieces don't fall into the engine opening. (stuff an old rag in the ...

...remove the pan that covers the bottom of the engine. Locate the red plastic cap that was behind the pan that you just removed. This red cap is your radiator drain plug. Remove the radiator cap from ...

Question about GMC Sierra

1 Answer

...remove the black plastic on the side of the housing. With that gone, move on to the nastiest part of the job. The three bolts on the thermostat housing. The first one is easy, it's the one closest to ...

Question about GMC Sierra

2 Answers

...remove and replace then on passenger side radiator un screw plastic butter fly antifreeze will come out of there take bottle where antifreeze is and clean take cap off and clean catch all the ...

Question about GMC Sierra

2 Answers

...plastic scraper to remove the old gasket completely. Put the new one in the same direction as the old one, replace the cover but do not over tighten the bolts. Replace the antifreeze and run the car ...

Not finding what you are looking for?
2000 GMC Sierra Logo

1,055 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 GMC Sierra
1998 GMC Sierra

987 Questions

1997 GMC Sierra
1997 GMC Sierra

847 Questions

1999 GMC Sierra
1999 GMC Sierra

601 Questions

1994 GMC Sierra
1994 GMC Sierra

604 Questions

1996 GMC Sierra
1996 GMC Sierra

457 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...