...vortec for my current computer to work properly? Will engine mounts, bell housing, and other items match up? If so, what year to what year, will match up with my 96, 305? Thanks. Untill recently GM ...
Question about GMC Sierra
...engine then it is not a Vortec motor. If you want to swap your 5.7 with another 5.7 (5.7 = 350) Then the 88-95 should work, Just double check your sensors and locations as the plugs may be different ...
...vortec motor no start keep foulling out plugs to much gas Replace the coolant sensor on the front of the intake manifold.The coolant sensors on this engine does go bad and wont set a check engine ...
...vortec for my current computer to work properly? Will engine mounts, bell housing, and other items match up? If so, what year to what year, will match up with my 96, 305? Thanks. Can I use my ...
Flashing engine light 96 gmc Sierra 5.7 vortec engine the cpu has found sensor/s that are outside set parameters. have the fault codes read and replace found faulty sensors.
99 gmc sonoma wont start Can't get it to start I got new battery still won't start. V6 vortec Engine cranks (Turns over) & will NOT start ?? Engine will not crank (Turn over) ??
...Vortec for a few hundred more than a rebuilt V6. It is a standard 5 speed, so they both use the same transmission . It will mechanically fit and bolt up okay. What will I have to buy to make the ...
I need the firing order for a 2003 vortec v6 engine GMC Sierra trucck 1-6-4-5-3-2 clockwise rotation front - 2-4-6 rear 1-3-5 good luck!
what is the operating parameters for the fuel pressure regulator in a 1997 sierra 1-ton 350 vortec It should maintain the fuel pressure at about 55 psi when the engine is at idle.
is there a diagram of the low ac fill port on a 1998 vortec 5700 engine The low side port is on the accumulator. Silver can near the firewall on the passenger side.
721 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions