2001 Chevrolet Blazer "neutral safety switch" Questions

Ad

Question about Chevrolet Blazer

1 Answer

...neutral safety switch ,try in neutral ,see if it will start.Make sure the negative battery cable is good,this can cause the problem also,see if there is 12 volts on the purple wire on the starter ...

Ad

Question about Chevrolet Blazer

1 Answer

...Neutral Safety Switch...Note that the top row has 4 female pins...These are signal wires for the transmission and not involved with the starting contacts of the switch...The switch has more then one ...

Ad

...safety neutral switch connecter attatched to it or separate if if the switch was chainegd and not the connecter then could the connector be bad? this is for the 2001 chev blazer Hello! The safety ...

can i make a 96 transmission work in my 99 blazer ?the only difference is the 96 has one more wire on the plug to the neutral control switch its (org/blk ) buy the right neutral safety switch .

...Neutral Safety switch replaced, and now the Park/Neutral position indicator on the dash is not working right, when I went from reverse to park, the indicator showed still in reverse. check and adjust ...

...neutral safety switch. It is a black box located on the side of the transmission. You will want to heat up the switch where the electrical connectors go in with a heat gun, or you will break the ...

...neutral safety switch after much reading online. It worked and has worked perfectly since then. The shops I took it to told me to put in a whole new motor for about $600. I think I got the safety ...

...neutral safety switch on a 1996 blazer , column shift. Under the vehicle where the shift cable goes into the transmission. There's a black plug that the linkage connected to the cable goes through. ...

Question about Chevrolet Blazer

1 Answer

...on the fire wall wont activate if i bi pass it it works weres my problem? if you have tried a new relay and it still doesn't work, check the ignition switch and wiring, and the neutral safety

...blazer 2000 P1780 - Park/Neutral Position [PNP] Switch Circuit .The connector to the neutral safety switch is probably faulty and may require replacement of the plug and neutral safety

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

2,609 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...