2003 Dodge Neon "accelerater cable" Questions

Ad

Question about Dodge Neon

1 Answer

...neon wont accelerate after a certain mph. What could that mean? i had a problem like this turned out i had a broken mounting stopping accelerater cable from turning full circuit could be worth ...

Ad

accelerater cable on focus 02 reg How do I remove and replace the accelerater cable you may have a badly carboned throttle body that needs cleaning with carb cleaner. If cable: Accelerator Cable ?1.8L

Ad

...accelerater cable replacement I just rescued a 1970 Karmann Ghia convertable from salvage ,the problem is accelerater cable is broken ??? is that a bear to change /do I have to remove belly pan ??? ...

Our 2004 Holden Cruze revs out 7000 can't stop it with accelerater and cable looks fraded Revs out frad cable replace the cable first and then check for a missing return spring

...safety. What could be causing this problem? sounds as if the accelerater cable broke, when you were able to throttle under the hood did you happen to notice if the accelerater cable was moving

the engine is idling very high, and there is no more adjustment left at the accelerater cable [as though the cable has shrunk] Could possibly have a vacuum leak which would cause the high idle

Question about Dodge Neon

2 Answers

...accelerater is cable type, then this will need replacing as it would have frayed causing the cable to stick within its casing. If you have an electronic throttle without a cable, then your throttle ...

Question about Dodge Neon

1 Answer

...k-1500 5.7 literengine now i need to adjust the sesent or t.v. cable to ajust the detent cable have someone push the accelerater down inside while you ajust the position at the carb. or throttle ...

My 04 ford explorer 4.0L acceleration petal it's not working . Can it be a sensor? It turns on fine but it doesnt accelerat open the hood you should see the throttle cables on the side of the ...

Question about Dodge Neon

1 Answer

...I locate (TPS) on 99 S70 ? Its on the throttle body assemly.Follow the accelerater cable to the throttle body and the tps (throttle position switch) should be bolted to the end of the throttle

Not finding what you are looking for?
2003 Dodge Neon Logo

1,131 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

861 Questions

2004 Dodge Neon
2004 Dodge Neon

762 Questions

2005 Dodge Neon
2005 Dodge Neon

710 Questions

2000 Dodge Neon
2000 Dodge Neon

606 Questions

2001 Dodge Neon
2001 Dodge Neon

544 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...