Question about GMC C1500
...vent. when i move the switch on the dash I see the linkage move under the dash, but it wont turn off the defrost, and not a full blast Why won't my 1999 chevy 1500c will not change from ...
...vents and flloor) but warm air will not come out the defrost. You can hear something click in the dash that you assume is some kind of flapper and air will blow but it's cold air. good work,
...dash. Answer: Drain Coolant, Remove kick panel and center lower trim plate by pulling outward. Remove outer floor air duct. Remove the heater/vent module. Remove the heater core access cover screws. ...
...the vent system. Any idea how to clean out the vent system at least have to get under dash to locate vents ducting and remove it may have to remove dash to get to all of the vents and ducting
Question about GMC C1500
...dash) AC / heater vent? My direction/adjuster tab broke off, and so I need to replace the vent. However...I don't know exactly how to remove the broken vent (also referred to as the "case assembly") ...
84 911 air vents in dash My dash vents ( the luvere ones ) are twisted, and/or missing. I would like to remove the old vents and replace them with functional ones. How do I remove them from the dash ...
Question about Ford Cars & Trucks
...is to a 2006 Ford escape. most air vent grills are installed before the dash is put in the car to that end you will probably have to remove the dash to get to the back mounting nuts to remove the ...
Question about GMC C1500
...vent door underneath the dash?vents Under neath the venting system behind console there is a venting housing that can be removed. Likely the air flow directional vent flap is stuck or the motor that ...
...vent door is located in the heater box next to the blower motor. The settings of the dash vents are out of the dash customer controller as the links may be misaligned when the dash was taken out. So ...
...dash and the vent (where the vent pivots) and gently prying up until the vent comes out. Replacing the vent is easier, just very carefully snap it back in the pivot holes. If the space seems a little ...
668 questions posted
Usually answered in minutes!
77 Questions
67 Questions
61 Questions
59 Questions
36 Questions