1995 GMC Sierra C1500 "ende" Questions

will a salvaged 99 escalade front end fit a 97 silverado without any customization?? yes it can, i had a 97 silverado with a 2000 escalade front end on it and it was air bagged. the front end will ...

how to install tie tod ends Basic task is to take the nut off the top of the joint, and knock the stem out of the knuckle or joint. You may need to use a pickle fork to get it to move. Then you ...

how to check blown fues With the fuse still in the fuse block and the key in the on position, then take a 12v test light and find a good ground for the clip wire on the light, next touch the probe on ...

I have a 1989 chevy c1500 will bad front shocks make it sway all over the road on windy days. All the front end parts are new except for the front shocks.THANK YOU It Shouldnt, It Is Either Going To ...

I have 58 chevy apache and have a turbo 400 transmission. It does 60 mph at 3000 rpm's. I would like to change the entire rear end so that it goes 60 mph at approx 2200 rpm. I now have a 350 engine in

steering wheel vibrates when i apply brakes 1995 sierra GMC C1500. i have changed my complete front end parts and still when i apply brakes the front end shakes the steering wheel you have warped frt ...

when i apply my brakes the front end shakes. i have changed all the front end parts and problem is still there your frt brake disc rotors are warped replace them and frt brakes

my rear end in my 98 chevy 1500 is making some noise and i would like to know where to start. i know a few things about cars i just dont know to much about rear ends noisey wheel bearings??

what rear end can I replace for posi trac youd have to drop the differential covers in the junkyard til you found one with posi. posi was optional on the trucks. 9" rear end or Dana 44

1993 Chevy w/t 1500 rear end is leaking by drive shaft The rear end seal.first block the wheels,so truck does not roll away.remove drive shaft four bolts to do this.might have to a pry bar to seperate