1995 GMC Sierra C1500 "replace brake light switch 39" Questions

...brake light switch issue. Replace switch.If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch. There's a switch on ...

brake light and blinkers dont work i have a 1996 chevrolet 1500 2WD with a 4.3 V6 and my tail lights work but the brake light don't come on when I push the brake. Also the blinkers in the tail

...light bulbs. Evertything was working fine. Now neither the tail lights nor the brake lights don't work. cheek you brake light switch it's under the dash.. if it goes out it kills brake and ...

...with the brake sensor attached to brake arm'on 1996 chev-pickup 1500 a good place to start is to replace the brake light switch, if you can mess with it to get it out of park chances are it is ...

...brake light switches have a small nib or piston/pushrod which is depressed by the pedal when the pedal returns. Many pedals are fitted with a metal plate and sometimes a plastic bung, which connects ...

replace the fuse the break light stays on all the time no matter what they stay on and my emergency flashers don't flash, the blinkers works, the back lights work and parking light all lights work

brake light.  That light is to alert you that a problem  exists in your braking system,  not the brake lights.  I think you will have to pull off the rear drums and investigate why

brake light switch behind pedal, replaced bulbs. Turn signal, 4-way, running lights, reverse lights all work. Brake lights do not when pedal is depressed, any ideas? maybe the bad connection._________

...into the headlight switch and the brake light switch ? In most cars the headlight fuses are in the engine compartment near the headlights or near the drivers side by the firewall. Hope this

your brake light switch. Located at the bottom by your brake pedal. Maybe it's the switch on the brake pedal arm that controls the brace lights. It may need to be adjusted or replaced. Hope this helps