2001 Nissan Xterra "ignition timing degrees btdc" Questions

Ad

Question about Nissan Xterra

1 Answer

ignition timing I need the ignition timing for my car. If it is timed on one it absolutly does not run right. Anywhere else it does not run. first you have to remove the shunt, then you set the timing

Ad

Question about Nissan Xterra

1 Answer

...ignition be set to run on unleaded petrol so no damage will be caused to valves. ****. Hello Michaelatkin : Is this jaguar US based as far as specifications ? US-Based with engine running and Timing ...

Ad

...ignition timing regulated? Car gets 99 BTDC on ignition timing and failed SMOG Test in CA. Listed as GROSS POLLUTER. Passed SMOG Test at 25 mph but failed at 15 mph with 3,951 NO PPM (MEAS) something ...

...on this,,, what timing are youtalking ignition or valve ? 10 degrees btdc is about right so check for other problems like crank /cam sensor position sensors , immobilizer ,or ignition control ...

Question about Nissan Xterra

2 Answers

ignition timing was 10 degrees BTDC @ 700rpm For 80 and up zx, non turbo - 8 degrees BTDC +- 2 degrees @ 700rpm turbo - 20 degrees BTDC +- 3 degrees @ 700 rpm Also done with distributor vacuum advance

Question about Nissan Xterra

1 Answer

...ignition timing: 30 BTDC. How do I adjust this and where should it be at? hey why dont you buy a timming gun or borrow from somebody and time it with that, make sure its 12 degrees btdc and make sure ...

...Ignition timing should be set at 10 degrees BTDC (before top dead center), with vacuum advance hose disconnected and plugged, engine idling at 800 rpm or less. Align the engine timing marks at TDC ...

Question about Nissan Xterra

1 Answer

...Ignition timing connector. I disconnected my timing bypass connector. to time my truck. Set Timing to 4 degrees btdc. When I reconnected my bypass connector the mark on my damper should have move ...

Question about Nissan Xterra

1 Answer

...ignition timing what is vw camper ignition timing on t25 If it is really a 1986 the spec is 5 degrees before top dead center at idle. Much better (and easier) to set at 35 degrees BTDC at 3000

Question about Nissan Xterra

2 Answers

...ignition timing can be set using marks on the vibration damper. The wide mark is TDC (Top Dead Center), each mark after the wide mark represents 2, 4, 6, 8 and 10 degrees before TDC. Set timing 3 ...

Not finding what you are looking for?
2001 Nissan Xterra Logo

692 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...