2003 Nissan Altima "cam shaft sensors located" Questions

...cam shaft sensors and one crank sensor Nissian did sell a kit at one time with all the sensors in it one cam sensor is in the left cylinder head a one is in the right cylinder head Hi I have a 2002 ...

cam sensor located in the bottom of the distributor. Sometimes the seal will fail on the internal shaft and the vehicle will not start. Replace the distributor and it will work if that is your problem

where is a cam shaft poision sensor in a 2003 altima located are u sure this code is not for the crankshaft position sensor, there is a recall for that from Nissan, they will replace it free of charge

shaft sensor. where are they locates on the 2005 nissan altima 3.5 rear of both cylinder heads.however these are not cam sensor codes.these are intake timing control codes and since you have set codes

...diagram of where the cam shaft sensor is located on a 2004 nissan altima 4 cylinder?at the trans end of cylinder head by where upper rad hose connects to engine.3 wire connector.10 mm bolt secures

I cannot locate the cam shaft sensor in my 2003 nissan altame 6 cl. I think it's in the distributor

I own a 2003 nissan altima and the crank and cam shaft sensors need to be replaced. Where are they located on my car, hope this helps

...shaft sensor located Nissan has a crank and cam sensor kit. I would not buy any aftermarket sensors because of the effort required to replace the sensors. (I do not work for Nissan). The information ...

...shaft sensor located on the 2003 nisan altima vehicle? I have 10 years experience in a Nissan dealership and I know without a shadow of a doubt that the Crankshaft Position Sensor is NOT located next ...

shaft position sensor located and is it a sensor that can be replaced in my garage? Yes, the sensor can be replaced in your garage (if you have some decent auto repair experience). This is not an easy