Throttle Pedal Position Sensor/ Switch D / E Voltage Correlation. Replace the Throttle Pedal Position Sensor/Switch.Remember to have the set code Cleared from the cars computer, this will turn off the
Throttle Position (TP) sensor is a potentiometer. It is mounted on the side of the throttle body and is connected to the throttle plate shaft. The sensor monitors throttle plate movement and position,
...Throttle Position Sensor Circuit P1125 Tandem Throttle Position Sensor Circuit P1132 Intake Valve Timing Control Position Sensor (Bank 1) P1135 Intake Valve Timing Control Circuit (Bank 2) P1137 ...
crack position sensor where is at There is NO SUCH Sensor as a crack position sensor. What or where is your Problem? There IS a THROTTLE POSITION SENSOR
Question about Nissan Altima
...also throttle position sensor may be faulty. Is the O ring bad cause oil to leak into chamber one and will throttle position sensor cause car not to start? yes that is why it smoke and yes for ...
...throttle position or throttle plate angle data Still should start,just not be able to use it very well After all that ----------you know how to fix it----------- You have used local shops & ...
throttle position sensor, coolant temperature sensor and air filter. Could be a dirty throttle body, vac leak, or a defective idle air control valve. The computer adjusts idle speed by controlling the
Question about Nissan Altima
...throttle position sensor, etc. The throttle control motor is operated by the ECM and it opens and closes the throttle valve. The throttle position sensor detects the throttle valve position, and the ...
throttle positioning sensor see the position throttle sensor:
throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or ECM is disconnected. OPERATION PROCEDURE 1. Make sure that accelerator
2,265 questions posted
Usually answered in minutes!
1,587 Questions
1,306 Questions
569 Questions
534 Questions
410 Questions