...replace fuel pump and filter as it is one unit pretty easy though. crankshaft sensor is either under the harmonic balancer pully or bolted to block facing it you normally have to pull pully to change ...
...replace Crank Position and also Cam Postion sensors. Check with your dealer- the campaign might be open. You will need your VIN number when you call. o.k... on the very botton of the engine... right ...
...replace YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE ...
...replace part way, hook up a harmonic balance puller, tighten until balancer come free, remove puller, remove HB bolt, remove balancer. Check seals before replacing, if damaged, replace, check keyway, ...
...get it off the crank. removed large single bolt. no other screws or bolts, no woodruff key in crank or balancer. HELP!!! need a harmonic balancer pulley you can rent them at your local auto part ...
Question about Cars & Trucks
...Replace the Timing Cover:** If the timing cover is severely damaged and cannot be aligned properly, it may need to be replaced. This is typically a more involved and time-consuming repair. 6. **Seek ...
replace the harmonic balancer on my 1997 jeep grand Cherokee. Will you please send me replacement instructions? Also, I would appreciate any helpful tips and a list of required tools. Thank you. first
...need to remove the wheel. 5. You should also consider replacing the seal around the harmonic balancer to minimize the possibility of a leak later. 6. Install the new harmonic balancer and tighten the ...
...comming loose and i dont know if i should use a rachet and tighten it or what do i need to do Replace the bolt coat with blue lock tite and torque to speck chances are the bolt has heated and ...
Question about Nissan Altima
...together,now there is still play in the harmonic balancer. Your pulley has a woodruff key like the one in the photo. In order to have zero play, you need to replace the key and the harmonic ...
2,513 questions posted
Usually answered in minutes!
1,450 Questions
1,306 Questions
569 Questions
534 Questions
410 Questions