Question about Oldsmobile Silhouette
heater hose quick disconnects on GM 3400 in 2002 oldsmobile silhoette heater hose snapped off just above quick disconnect. how/what's needed to get the disconnect off of the tube its on? Fuel line A/C
...heater hose on my 2002 Chevy Silverado 5.3 I am in the process of changing my heater hose and can't remove the quick disconnect to replace it how do I? You will have to have a special tool made by ...
...heater hose outlet quick disconnect? thanks with the quick connect tool, purchase at you part dealer, just push towards the end of the hose and pull hose off. go to any auto parts store and ask for ...
Question about Oldsmobile Silhouette
...heater hose quick disconnect. Do I need to use the tool I used to remove the old one?? The new quick disconnect does not seem to just slip on the heater core nipple, the old one came off pretty easy. ...
...system. Fill the cooling system. Disconnect the heater outlet hose at the water pump until coolant begins to escape and this will bleed the system. Hope this help (remember comment and rated
...removing a Rear Heater Core Hose. It is not connected using the traditional method of hose clamps. it is connected more like a hydraulic hose. There is no nut to turn, no clamp to squeeze. How can i ...
HEATER HOSE Unless you are in a warm climate RIGHT NOW, buy some coolant. Purchase the band clamps for it or the same type that are on it. Disconnect the water pump end of the hose and quickly replace
hose to drain the system. 2. Second you have to remove the drain tube from the heater's housing and disconnect the heater hoses from the core, to reach out the heat core you have to take off the sound
disconnect the heater core inlet and outlet hoses at the heater connections. Quickly plug the heater hoses and support them in a raised position. Allow the coolant in the heater core to drain into the
Question about Oldsmobile Silhouette
heater hoses, and fuel lines need to be disconnected. Check the wiring harnesses to see if they have quick disconnect clips.then remove the bolts on the bell housing and the motor mounts. Be sure that
478 questions posted
Usually answered in minutes!
601 Questions
450 Questions
394 Questions
268 Questions
211 Questions