1998 Mitsubishi Eclipse "overheating car cause ignition coil" Questions

...cause overheating coil. Most incorporate a variable dwell feature which prevents the coil from overheating when the engine is idling for extended periods. But I suspect this does not apply to your ...

...plugs in bad condition (or wires) creates excessive resistance in the ignition system and that resistance causes the coils to overheat. This overheated is the main cause of premature coil

...overheating and melting, it is likely that there is a fault with that particular coil or with the circuit that supplies power to it. Some potential causes for this issue include: A faulty ignition ...

...overheating. whats wrong with it? Most likely the cause of the ignition module burning out is because of the ignition coil, and you should try replacing the ignition coil and the ignition module both ...

...vehicle originally came with suppressed plugs or suppressed plug wires. If the suppressors were removed it may cause high current draw on the secondary side of the coil and also lead to

...overheating what take it to the grage no car stated no year ,no model , no engine stated. no answers. see? does engine run? if car is EFI, the coil is bad,or the ignitor shorted, EFI means Electronic ...

Ignition coil is overheating what is the cause of - mitsubushi minica Bad coil.

overheating and failing when they were mounted on the distributor body. Ford relocated them to the inner fender in a finned aluminum heat-sink to keep them cooler and last longer. Usually the cause of

...ignition control module or coil replace the coil with a suitable voltage rating( some are straight 12 volts and some are 12 volts start 7.5 volts run it is an overheating electronic component that is ...

Overheating can cause cylinder head and/or cylinder block distortion (twist) which can cause a loss of compression and/or coolant in the cylinders. Coolant in the cylinders takes time to leak past the