2005 Mitsubishi Outlander "remove broken spark plug engine" Questions

Ad

...spark. Check for pinched/broken/leaking fuel lines. Make certain the air filter is good and free of blockages. Test spark plugs/wires for proper tightness, condition and spark... Could be a fuse, ...

Ad

Question about Mitsubishi Outlander

1 Answer

...broken wire ? timing belt? advise installing scan tool that reads live data check eng rpm on scan tool see if shows eng rpm while cranking , poss remove upper timing belt cover make sure is turning ...

Ad

...allow engine to turn over as your car should not have an interference engine. If engine will not turn by hand with spark plugs out susspect internal engine damage siezed bearings broken rod and

broken or loose spark plug wires check them close with your hand. u can also check at night time with the engine running, watching for an out of place spark. next i would check the spark plugs, remove

Question about Cars & Trucks

1 Answer

...remove broken spark plug from 5.4 3 valve engine. Google the question-Plenty to read There are several tools for that When you buy a brand new 5.4 3 valve, you bring it home & remove the 2 piece ...

...remove plug to see if it is fouled out. the best time to check for brake or cracked spark plug wiring is at night with engine running and doing a walk around to see if the insulation on wireing is ...

...to know. Yes, I understand you have a broken plug in the cylinder head but you should be able to use a socket and remove the plug just be sure nothing falls in the cyl. head when you remove the

Question about Mitsubishi Cars & Trucks

2 Answers

...timing belt is not broken, remove distributor cap and make sure rotor turns while cranking the engine (tap the key lightly, don't try to start in case timing belt is broken it can damage the

Question about Mitsubishi Outlander

1 Answer

...remove the spark plugs install a compression gauge in the spark plug hole and crank engine about 4 cycles compare readings to all cylinders reading should be around 125-150 psi readings in the 50 psi ...

...broken. Misfiring could also be caused by a short in a spark plug wire. I would start first by identifying which cylinder is suspect. You can start the car & remove one spark plug wire at a time. ...

Not finding what you are looking for?
2005 Mitsubishi Outlander Logo

236 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...