1998 Chevrolet S-10 Pickup "chevy s10 coil" Questions

...Chevy s10 2.2L very rough idle at low rpm 2000 Chevy s10 2.2L 4 cyl engine. Truck was running fine and recently deveolped a very rough idle and miss at low rpm when standing still. Once its past 2000 ...

I have a Chevy S10 V6 1987, I have no spark from the coil to the spark plugs. I changed the pickup coil and modrule. check for ignition start supply to the coil or series resistor. maybe help.

...truck wont start. its a 2.2 chevy s10. 1994. i dont know what it could be. HELP Do you have spark?, if not, under your coils is a module (like a plate that the coils mount too) That may be the

...chevy s10 pickup is not getting any fire..I cxhange the ingition module on top of the distributer,change the coil,still no fire,,what next? chech power at the coil and osilateing power at other pole ...

chevy s10 1.9 liter shut off an wont start back up its getting fuel but has a very weak spark Could be the coil, ignition module in the distributor, or various other things. I would check the coil for

chevy s10 pickup firing order diagram for a 1999 chevy s10 pickup I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of

...chevy S10 with a 4.3L it cranks over but it don't start. i checked pick up coil it's good. i checked ing. coil . it checks good. and icontrol modgual with a ne have a 1992 chevy S1with a 4.3L it ...

...chevy truck S10 Tahoe 4x4 cut out on me all of a sudden. It's not the fuel pump i checked. It's not the timing chain. There is no spark going to the coil or to the distributor. I changed coil. Still ...

are not correct. Also let me know if you need any help to understand this diagram, or if you require any further assistance. May please someone help me with the firing order for a 2001 Chevy S10 2.2L

...chevy S10 with a 4.3L it cranks i have a 1992 chevy S10 with a 4.3L it cranks over but it don't start. i checked pick up coil it's good. i checked ing. coil . it checks good. and i replaced control ...