2006 Chevrolet Colorado "wheelhouse" Questions

Remove: Lift the vehicle high enough to gain access to the knock sensor (KS) through the left front wheelhouse. Remove the left front wheel and wheelhouse liner. Knock sensor (KS) (A), Engine harness

...and where a 11998 Plymouth voyager signal light change driver side front From under front wheelhouse, remove access cover behind park and turn signal lamp Through access hole in wheelhouse, ...

...radiator support, three vertical bolts on the top radiator brace, and one bolt at the rear of the wheelhouse to the cab body. Yes, the wheelhouse is spot welded to the fender and must be removed ...

...to the silly thing is a whole different story. You must remove the rear wheel and the plastic wheelhouse lining to get to the upper mounting bolt.. The wheelhouse lining has about a gazillion ...

...battery cable (2). Refer to Battery Negative Cable Disconnect/Connect Procedure . Remove the wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front . Lower the vehicle. Open the ...

...sensor is accessed by removing the right front fender liner Remove right front tire and right front wheelhouse liner. Disconnect crankshaft position sensor pigtail harness from main wiring harness. ...

How to replace right side low beam head light bulb? {: ) REMOVE THE RIGHT FRONT WHEELHOUSE LINER The wheelhouse liner is sometimes called the mud guard or the splash shield, whatever. You may remove ...

...you replace the drivers side low beam headlight on the 2008 GMC Acadia? {: ) REMOVE THE LEFT FRONT WHEELHOUSE LINER The wheelhouse liner is sometimes called the mud guard or the splash shield, ...

...Raise and support the vehicle only high enough to access the thermostat housing through the wheelhouse. Remove the left wheelhouse liner. Remove the radiator inlet hose from the ...

...battery cable (2). Refer to Battery Negative Cable Disconnect/Connect Procedure . Remove the wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front . Lower the vehicle. Open the ...