2002 Mitsubishi Montero "intake torque top" Questions

Ad

Question about Mitsubishi Montero

2 Answers

torque of the new spark plug. Set the tension to the specifications listed on the spark plug package. 7 Reattach the spark plug wire to the new spark plug. 8 Continue this process with the other spark

Ad

...torque. Upper Intake Plenum: When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be ...

Ad

Need torque sequence and torque specs for intake plenum on 3.5L 02 Olds Intrigue. bottom intake bolts torque 15-18 ft lbs from center and in criss cross pattern top plenum bolts 12-14 ft lbs

Question about Mitsubishi Montero

1 Answer

Intake torque on top & bottom bolts 1999 5.7 2 pc intake Apply sealer to the lower intake manifold bolts prior to installation. On the 5.0L and 5.7L engines, install the bolts and torque in sequence ...

Question about Mitsubishi Montero

1 Answer

...BOLTS AND REMOVE BRACKET.REMOVE STARTER FROM TRANSMISSION.REMOVE STARTER ELECTRICAL WIRES.INSTALL NEW STARTER BACK VISA VERSA. TORQUE STARTER BOLTS 40 FT LBS TORQUE INTAKE BRACKET BOLTS 40 FT

Question about Mitsubishi Montero

1 Answer

...intake manifold. Tighten the nuts and bolts to the specified torque. Install the new exhaust manifold gasket and the exhaust manifold. Tighten the exhaust manifold attaching nuts to the specified ...

...intake manifold on a 1998 ford mustang gt. I am looking for the torque specs for the 4.6 sohc vin "x" motor, at least top end. any ideas? first torque 15-22ft/lbs. then warm up the engine and ...

Torque the intake and exhaust camshaft sprocket bolts; torque as follows: First Pass: 63 lb-ft. (85 Nm) Second Pass: Turn an additional 30° using a torque angle gauge Install the sealing ring and

torque sequence for intake top and bottom with photo for 3800 pontiac 2000 Upper Intake - 89 Inch lbs. all around. Lower Intake - 11 Foot lbs. all around. If you have any comments please feel free to ...

Question about Mitsubishi Montero

1 Answer

...the sequence order and the valve cover, thank you. intake manifold torque is 174 inlb valve cover is 88inlb end to end to center opposit of intake manifold . hope this help.pls dont forget to

Not finding what you are looking for?
2002 Mitsubishi Montero Logo

425 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...