1998 Dodge Stratus "fuel shut off valve" Questions

...shut off. could it be the tempature sencor after awhile it starts but doese the same thing after it runs awhile if it were my car i would check the fuel pressure, sounds like maybe the fuel pump. ...

fuel shutoff valve. to see if it is on. press the reset button to do this. if it stays on. The answer could be pinched wires (a short) from the fuse wiring back towards the shutoff valve. if the valve

...fuel pump come on when you turn the key to the on position. It should run for about 2 seconds and the shut off until you begin cranking the engine. If all that seems good then the next thing to would ...

...valve on the fuel rail and have fuel, but do not have a gauge to check the pressure. After a long time with NO DC power is there anything I should reset? Where do I look next. The car was driven 3 ...

...shut it off and restarted it, it would run normal until it rained again. Then my wires started popping off. I was told my cataletic converter was clogged. We replaced the fuel pump, fuel filter, ...

fuel saving system that does shut down the compressor even if you have it running full cold. there is no reason changing alternator would cause ac not to work. it could be the pressure switch and then

...fuel shut off valve location 1998 ford windstar and how do you reset it How do you reset the fuel shut off valve The fuel shut off is a switch - inertia fuel cut off switch , it cut's electric power ...

...valve closes the flow path from the evaporative emission valve to the evaporative emissions canister during refueling to prevent overfilling of the fuel tank . Evaporative Emission Tube Shut Off ...

...fuel+shut+valve+location Switch location https://www.google.com/search?q=chevy+lumina+fuel+shut+off+switch+location .... P0006 is a generic OBD code that means your engine control module (ECM) isn't ...

the emergency fuel shut off valve, heavy impact is intended to shut fuel supply off, may be getting faulty, sometimes really rough bumpy roads can shut supply off, check your manual to see if equipped