2000 Dodge Neon "install idle speed control valve" Questions

Ad

...actuator and adjusts the throttle valve opening angle to increase the engine speed and adjusts the idle speed for the increased load. Read more: ...

Ad

...Idle Air Control (IAC) valve which is mounted to the throttle body - cutaway view shows air bypass direction --- REMOVAL & INSTALLATION Disconnect the negative battery cable. To remove the IAC ...

Ad

Question about Dodge Neon

1 Answer

...idle speed. The valve is located on the side of the throttle body. The valve is controlled by a duty cycle signal from the PCM and allows air to bypass the throttle plate in order to maintain the ...

idle speed. The IAC valve consists of windings, an armature, a return spring, and a rotary slide. The engine control module (ECM) pulses the voltage to the winding, the opposing forces on the armature

Idle speed for Kia Rio 2007 is 1600 RPM. How do I reduce this to normal 750-800 RPM? The motor was rebuilt due to overheated. Cylinder head was re-faced and pressure test before re-installation. ...

Question about Dodge Neon

1 Answer

...idle speed. TESTING Turn the ignition switch to the OFF position. Disengage the wiring harness connector from the IAC valve . Using an ohmmeter, measure the resistance between the terminals of the ...

install, how does adjustable IAC screw figure in obtaining proper idle speed after setting throttle cable free side play to 3/8 to 1/2 inch.(per Haynes manual) Other than mention of screw nothing said

Question about Dodge Neon

2 Answers

...idle speed control valve connector for looseness,corrosion of poor contacts. Jiggle the harness at various places to find any damaged wire. 2. Idle speed control valve defective. (replace. Merely ...

is controlled by the the idle speed actuator which is part of the throttle body. installed new ac compressor and valve, and 5 cans of coolant. ac only worked for 1 day. PLEASE TELL ME WHAT DO I DO NOW

Question about Dodge Neon

1 Answer

...idle air control solenoid from the throttle body To install: Clean the area of old gasket material. Using a new gasket, attach the IAC valve to the engine. Tighten the retaining screws to 71?102 inch ...

Not finding what you are looking for?
2000 Dodge Neon Logo

940 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

839 Questions

2004 Dodge Neon
2004 Dodge Neon

733 Questions

2003 Dodge Neon
2003 Dodge Neon

727 Questions

2005 Dodge Neon
2005 Dodge Neon

688 Questions

2001 Dodge Neon
2001 Dodge Neon

534 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...