2000 Dodge Neon "install power steering sensor" Questions

Ad

power steering preo sensor circuit range/performance FOR A 2000 neon my engine ligh is on, the code is p0551 Here is the description for the code.  You need to check the sensor and the wiring ...

Ad

...power steering sencer Not difficult to do. I had to do this for my 2002 neon. Go to your local parts store and buy a "power steering pressure switch"...should be around 20-25 dollars. It's located ...

Ad

...power steering pump. Unplug the electrical connector on the crankshaft sensor by lifting the plastic lock tab and pulling it off.2Remove the 10 mm bolt that secures the sensor to the block, using a ...

...Install the power booster vacuum hose to the intake manifold. Install the windshield wiper module to the cowl panel. Reconnect the electrical harness to the module. If removed, install the air intake ...

...Install the power booster vacuum hose to the intake manifold. Install the windshield wiper module to the cowl panel. Reconnect the electrical harness to the module. If removed, install the air intake ...

Install the rear power steering pump-to-engine block support bracket. Torque the 2 support bracket mounting bolts to 40ft. lbs. (54 Nm). Install the nut to the mounting stud behind the pump and torque

...Interference (EMI). Install the power steering pump assembly, then the alternator braces. Install the serpentine drive belt, then the right engine mount. Connect the negative battery

Question about Dodge Neon

1 Answer

...Install the power steering pump through the exhaust tunnel of the vehicle. Loosely install the nut on the rear of the pump to hold the pump to the bracket. Install the front bracket on the pump and ...

...install a power steering pump for a 1997 chrysler seabring conv Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze 1995-1998 Power Steering Pump - REMOVAL & INSTALLATION Cirrus, Stratus, Sebring ...

the retaining bolt to 8 ft. lbs. (10 Nm). 4. Connect the sensor electrical connector. 5. Install the power steering pump, if removed. 6. Reinstall the serpentine drive belt. no, but the p.s. pump does

Not finding what you are looking for?
2000 Dodge Neon Logo

940 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

839 Questions

2004 Dodge Neon
2004 Dodge Neon

733 Questions

2003 Dodge Neon
2003 Dodge Neon

727 Questions

2005 Dodge Neon
2005 Dodge Neon

688 Questions

2001 Dodge Neon
2001 Dodge Neon

534 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...