need diagram for 1998 serp belt system Hi my name is Allen! To help you I need to know which engine you have example. 3.0 liter 3.3 liter 3.8 liter Waiting for reply!
...it's 6 cyl with 3.3 liter engine automatic. also to replace the AC clutch or compressor. can you pls tell me how to do both of them? thanks, roberto how to remove and re-install serpentine
...liter engine Below are some instructions that I hope will help. Just a hint as far as installing the belt. Before you do the final torque or the belt tensioner, you should rotate the engine (by hand) ...
...liter V6 engine. On any other engine types, including four-cylinder engines, you must remove the timing belt from the engine to access the water pump, which is a dangerous task that can mess up the ...
...or loosen the belt?, Engine is 3.3 Liter V_^ the belt has a spring loaded tension-er which has to be forced out of the way to relieve tension. should use a 3/8 breaker bar or long handle
...engine and will cost more than just replacing timing belt The 3 liter mitsubishi is pretty prone to this actually. You would have to tear it down to see what happened, but yes it's likely that you ...
...liter The oil pump assembly used on this engine is mounted at the front of the crankshaft. The oil pump also retains the crankshaft front oil seal. Remove the accessory drive belts. Remove the timing ...
...is not run by the timing belt. The 3.3 liter engine uses a timing chain. Hope you find this information useful! Yes, which is behind the timing belt/chain cover located on the front of the
I'm tring to put the alternator on my 96 dodge grand caravan 2.4 liter engine, but i the belt is crooked. is the belt twisted or not running in line
engine temp.and a/c operation are ok. 3.8 liter V6 could be your alternator. at start up. alternator usually has a big load because you just use your starter. it would recharge the battery and after a
1,334 questions posted
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions