2001 Dodge Grand Caravan "front blower moter" Questions

...just need a new front relay blower? First check the voltage at the front blower moter. If it has voltage then it may just need a new motor. It can be the blower relay,or the blower motor ...

Front blower motor on 2005 dodge caravan not working Rear blower motor is working; heater is working (can feel the heat coming through the pipes), but when I turn on the fan to distribute the heat in ...

front blower motor on 2002 dodge grand caravan sport only works on high speed it's the blower motor resistor , it's behind the glove compartment, just make sure you disconect the neg. for battery ...

...front off the dash so it want get the way. look at all line theres a valve looks like a flat round disk if it dont work than throw it . plus your fan has 3 to 5 stages on the moter like low med hight ...

it will come on by itself with no input blower motor is wore out, if you can strike the bottom of it under the front passenger dash and cause it to start working it is definately to blower is wore out

...front of vehicle. From you're description I'd say the blower moter has cooked a bearing. Check fuse #1 and #2 both are 15amp. They're in the fuse block behind the coin tray on the lower left side of ...

front blower will not blow. checked all fuses all ok. did not make any noise before going out. what could it be? A common cause for this is a bad blower moter resistor. The resistor is located under ...

...front blower moter would work was if it was on high, and it appeared that there was no issues with the rear blower. However, neither work now. We took it to a local mechanic, and he verified that the ...

Front Blower Resistor on 99 Suburban K1500 Looking for detailed help on finding the location of the blower resistor on a 1999 Suburban K1500. Took the glove box out and looked at blower moter (covered

...Front Blower stopped working. Replaced Resistor now it works but the blower motor runs constantly. i would replace the  blower motor relay .sounds like its stuck in the closed postion, normanlly ...