2002 Dodge Neon "ford f250 egr valve problems" Questions

Ford F250 egr insufficient flow I have a ford F250 and i am getting the message "EGR insufficient flow", how can i go about resolving this problem. i found that the egr valves sometimes get clogged up

Ford F250, 4.9L engine. Runs sluggish 1988 Ford F250. Runs sluggish intermitently, gets really bad gas milage. Service code 32. Smell of raw gasoline at tailpipe. Is this an engine management problem?

Ford F250 EGR problem I have a Ford F250 which is giving me error code "EGR insufficient flow", can someone assist me in solving this problem. Thanks The EGR valve (Exhaust Gas Recirculator) provides ...

EGR valve and cooler? How to clean EGR valve and cooler? Basically, a bad EGR valve should be replaced http://www.car-stuff.com/carparts/fordf-250superduty20002004motorcraftmicx1721151326.html There's

...f250 soon as engie warms up a little starts sputtering real bad shut off awhile and runs good for a few minutes then starts sputtering again check egr valve make sure it is not being opened at Idle ...

...F250 XLT Lariat 7.5l E40d, I have gone through the whole thing with a fine tooth comb new distributor plugs wires IAC injectors fuel filter and tested the EGR TPS and vacuum Leaks I have not replaced ...

...ford f250 5.8l how do i fix this this problem. I have replaced the egr position sensor already , ck valve for operation, ck to see to see if egr passage is clogged up. everything seems to be working ...

...f250 exhast i have an f 250 that just started to spew white smoke from the exhast. Is your coolant level dropping w/ no apparent leaks? White smoke from the exhaust indicates a bad head gasket, and ...

...F250 Desiel that has intermitent stall and hesitation problems. Can run fine for 150 miles then start acting up. The only service codes are for known EGR valve being disconnected and a glow plug or 2 ...

warm-up!!! has to warm up for 10min before it will move. Is this an EGR valve problem? If it is, is it as easily fixed as changing out the EGR core? Hope so.... sounds like a glow plug circuit problem