1998 Oldsmobile Bravada "floor jack diagram" Questions

Ad

Question about Oldsmobile Bravada

1 Answer

...floor jack to support the tank while the straps are removed. Lower the tank slightly, then remove the sending unit or sending unit/pump wires, hoses and ground strap. Be sure to label all connections ...

Ad

Question about Oldsmobile Bravada

1 Answer

...floor jack and a small block of wood. place the floor jack under the oil pan. jack up the jack until you feel it on the oil pan. remove the engine mount. you will need a deep 15mm socket and a 6inch ...

Ad

Question about Oldsmobile Bravada

1 Answer

...floor jack. I have a 2008 Pontiac Solstice. the best place for floor jacks is either under the rear axle or on the spot where you would place your OEM jack that came with the car your owners manual ...

Question about Oldsmobile Bravada

2 Answers

...FLOOR JACK UNDER THE OIL PAN WITH PIECE WOOD ON JACK SADDLE.SLIGHTLY RAISE FLOOR JACK A LITTLE TO SUPPORT ENGINE TO REMOVE TOP ENGINE MOUNT TO REMOVE DRIVE BELT.DONT DONT OVER JACK ENGINE DAMAGE OIL ...

Question about Oldsmobile Bravada

2 Answers

...FLOOR JACK WITH A PIECE OF WOOD ON FLOOR JACK SADDLE.PLACE FLOOR JACK UNDER ENGINE OIL PAN SLIGHTLY RAISE FLOOR JACK ENOUGH TO TAKE WEIGHT OFF THE ENGINE MOUNT. A HAYNES REPAIR MANUAL CAN SHOW YOU ...

...floor jack or the stock jack place it on the pince well at the bottom of door about 6 inch from frt of fender,put e-brake on when jacking car,heres a diagram to show you the four points, hope this ...

...floor jack. As far as that scissor-jack that it shows in your owners manual, I'd have to look for the placement. Be safe. There are safety issues when raising and supporting a vehicle. Safety is your ...

...FLOOR JACK ITEM62326 HAVING DIFFICULTY ENGAGING THE HANDLE TO FIT THE UJOINT You should go to www.reliable-store.com they have got books on every vehicle and also how to service/repair it, ...

floor jack and support it on jack stands to access the starter motor, you can't do it from up top. NEVER WORK WITHOUT JACK STANDS SUPPORTING THE VEHICLE, DISCONNECT THE NEGATIVE BATTERY CABLE

Question about Oldsmobile Bravada

1 Answer

...by step instructions with diagrams. You'll need a large compliment of tools to do the job as well as a floor jack and jack stands of sufficient strength to safely support the weight of the

Not finding what you are looking for?
1998 Oldsmobile Bravada Logo

637 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...