2001 Chevrolet S-10 "evap purge solenoid" Questions

Ad

Question about Chevrolet S 10

1 Answer

Purge Control Solenoid Damaged. It means that the solenoid that controls the evap system valve has failed and it's keeping it fully open so air is reaching the engine, messing the mixture. Replace

Ad

Question about Chevrolet S 10

1 Answer

...PCM purge command circuit Open or short in Voltage feed circuit to Purge Solenoid Faulty purge solenoid Restriction in EVAP solenoid, line or canister Corrosion or resistance in purge connector Bad ...

Ad

Question about Chevrolet S 10

1 Answer

...the purge valve located? Evaporative (EVAP) Emission Canister Purge Solenoid Valve (2.2L Engine) RH side of engine above the coil packs. this is from Chevy factory service manual . Is yours missing

Evap purge solenoid Check and/or replace the sensor Check and/or replace the purge valve Have a professional use a smoke machine to detect leaks First off all is your gas cap on tight? 80% of all Evap

...evap canister underneath by the gas tank also purge solenoid is either mounted on or near it , they changed the design of them also they are no longer round they are kind of rectangular in shape and ...

Question about Chevrolet S 10

1 Answer

...Purge Solenoid control circuit # P0443B EVAP Emission Sys # P0443B Those 2 parts have been replaced and still no change in status. Any thing we are missing? any info will help thank you. hi, had a 97 ...

Question about Chevrolet S 10

1 Answer

EVAP) purge solenoid. Remove the oil fill cap. Lift upward and remove cover from ball studs. The purge solenoid is under the plastic cover on top of the engine . Disconnect the EVAP pipe quick connect

EVAP canister purge solenoid (4). Remove the solenoid quick-connect hose (7) from the EVAP canister purge solenoid (4) to the enhanced EVAP service port (8). Remove the electrical connector (6) at the

Question about Chevrolet S 10

2 Answers

...EVAP canister purge valve P0441 Evaporative emission (EVAP) system - incorrect flow detected Possible causes: Hose connection(s), intake leak, EVAP canister purge valve P0442 Evaporative emission ...

...the tube. Disconnect the EVAP canister purge solenoid electrical connector (1). Remove the EVAP canister purge solenoid bolt (2). Remove the EVAP canister purge solenoid (3) and insulator

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

929 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...