2001 Chevrolet S-10 "removing rear axle s10" Questions

Ad

...Rear Axle repair - what do I have to do to remove the carrier bearing? In general you have to drain the rear end, remove the cover, remove the carrier pin, remove the axles, then remove the carrier ...

Ad

...rear axle pins are in 98 s10 blazer No "axle pins". Axles are held in with "c" clips. Remove wheels. Remove drums (or rotors). Remove differential cover. Rotate axles or driveshaft until a small bolt ...

Ad

...bolts and rear transmission crossmember bolts or nuts,suppport engine/trans. see if u have enough clearance between pan and axle remove pan. if not, split the exh away from the manifolds. worth a ...

rear wheel bearing on 2003 chevy s10 4x4 zr2? My skill level is basic, I do the oil changes and tune-ups on my truck but not to much more. It is a ''Do-ItYourSelf'' jobs or is the maybe beond my skill

Question about Chevrolet S 10

1 Answer

how do you check or add fluid to the rear axle of a s10 4x4 plug on right side of the housing near the driveshaft yoke.Remove plug with 3/8 ratchet,fill to bottom of hole

...s10 zr2 the rear end is a 373 8.5 with posi. the wheel seals are leaking took the diff cover off need to take the Cross Shaft Pin out but its seized to the spider gear. i have tried pounding it out ...

removing the engine even if you have to unbolt the motor mounts jack up the engine and place 2x4 pieces of wood between the block and frame to keep the engine up high enough to remove the pan. For the

Question about Chevrolet S 10

5 Answers

rear axle ratio (GU6) were installed in production. As a result of the axle ratio change, a new driven gear is required. Use (gray) 22 tooth driven gear (GM Part Number 3987922) if vehicle is equipped

...removing brake pads for a 1984 S10 fronts are rotors, and rears are drums Ok, these are pretty easy. Start with the front; they'll be the most important. Remove the tires, and place on blocks or jack ...

...rear axle assembly from my S10 pickup. leave the wheels on jack up the body and place on jack stands remove the suspension arm pins from the body mounts remove the shocks and drive line clamp off the ...

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

934 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...