...1 hours) Parts: 1. Brake Caliper Tools: 1. Combination Wrench Set 2. 3/8 in. Drive Ratchet 3. Floor Jack 4. Jack Stand Set 5. C-Clamp 6. Mallet Hammer 7. Flat Head Screwdriver 8. Socket Set 9. Tire ...
Is there a plug at the bottom of the radiator and do i need to jack up the car to do this Yes there is a plug, but in order to get at it u will need to crawl under the car, so yes jack it up.
...brake. If the Camaro no longer runs due to the fuel pump, place the rear end of the vehicle onto jack stands. Use a socket and ratchet to disconnect the negative battery cable from the negative ...
...you replace the pan. Your local auto parts store can give you some tips for the job. you need to jack up and put on jack stands. go under neath and look to see if it is oil filter, cooler or oil ...
lights ) if there is power then selonoid is most likely to be the culprit.Be sure to support car on jack stands or use two floor jacks or one floor jack and one bottle jack !!!! for safety reasons, of
...that make a "whining" noise it can be repaired by replacing the bearings. Here is how its done; 1. Jack up the rear end and support if correctly with jack stands. 2. remove the wheels and expose the ...
...be able to hear it pretty good from there if it is working. to drop the tank ... you will need a jack, 2 jack stands and a standard socket set ... just jack up the car and support it by the
...my 89 chevy caprice Its a bar that stoping me and also my exhaust pipe. You're only choice is to jack the engine up, remove the bar and loosen the exhaust. Not an easy job! Hello Ivory4blue : It ...
how do i change the starter in my 1993 camero disconnect the red terminal from battery. jack up car enough to get under. secure with jack stands. near rear of engine under car, is the starter. unplug ...
417 questions posted
Usually answered in minutes!
737 Questions
576 Questions
468 Questions
391 Questions
331 Questions