1998 Chevrolet Corvette "remove back windshield wiper arm" Questions

...remove the arm. 6. Place the arm back into the splined wiper arm stud by positioning it in the off position. some vehicles may have a wiper arms stop that the arm rests in the off position. If so, ...

...remove and replace the right broken wiper arm and also replace the wiper blades on both arms? On mine I lifted up the arm,at the base where its connected to the car there is a little metal tap that ...

...remove the three screws. The board is in te plastic cover. I pulled board out. dried it, put it back in and sealed the compartment with silicon. Works like new. first check at the wiper motor ...

...remove the windshield wiper assembly on a ford excursion from the shaft that moves the wiper back and forth? Wiper Pivot Arm Removal and Installation Lift the windshield wiper pivot arm to the full ...

...back and forth to loosen them from the pivot shaft. Lift off windshield wiper pivot arms . Remove seven screws retaining the cowl top vent panel. Disconnect windshield washer hose (17A605) at LH side ...

back until the hinge locks in a verticle position. remove the retaining nut at the bottom of the windshield wiper arm and pull the wiper arm off. slide the new wiper assembly on. tighten the retaining

...remove the wiper arms, wiper linkage and wiper motor from the wiper motor bracket, and install a new bracket. I just bent the tab back into place a couple times for our daughters 2005 Impala but it ...

...back until the hinge locks in a vertical position. 2. Remove the retaining nut at the base of the windshield wiper arm and pull the wiper arm off. 3. Slide the new wiper arm assembly on. 4. Tighten ...

...windshield no problem, but the passenger side wiper got stuck half way, went back down to the rest position and now it will not work at all. sounds like the connecting rod between both wiper arms ...

...back together and it's fine for a week to a month, then the whole ordeal starts all over. So I figure I'm gonna solve the problem by taking the grill between the hood and windshield off and cleaning ...