2003 Chevrolet S-10 "replace right door ac actuator" Questions

...right where it is supposed to be heat works but i have to close the front vents for to get def and even then there is heavy heat coming through the front vents and even bought a heater control from ...

door must close for sure AC cold wanted. check out this drawing,. A AND B MUST WORK RIGHT FIRST. for sure B is bad, IMO. https://www.rockauto.com/en/moreinfo.php?pk=8625836&cc=1371473&pt=10721

the book, I'm showing a mode actuator and a blend door actuator next to it. Some models use cables and some use small electric motors to move the doors. Are you sure you are working on the right door

...right of center under the dash. Look under there and see if you can see anything trying to move when you change the temperature setting. Also, if you hear a clicking noise, that would be the actuator ...

door actuator . There are electric motors behind the instrument panel that control air flow direction. GM calls it a Temperature Valve Actuator Replacement - Left Side Instrument Panel Insulator Panel

door actuator motors. There is one directly behind the glove box, one more is to the left of the cabin filter on the right side of the main climate control housing and one is above and to the right of

...vents the blend door actuator located on the air box (right hand side under dash) is prob. inop. worst case senerio the blend door its self is broken. I have replaced the actuator more than

...right rear panel, remove the panel and you will have full aceess to box, i have circled the actuator in the diagram to help you find it, sometimes if you remove the panel from the back door and the ...

...right. max setting is recirculate only and temp should reach appx. 40 degrees..hope this helps..chris Was browsing the ford f-150 forum and found that Ford has a lot of issues with it's AC, some too ...

right side but not on left side It can be issue with blend door actuator or vacuum leak or loose vacuum hose connection.I suggest you few help links.Click the link below and follow the troubleshooting