1990 Mercedes-Benz E-Class "seat belt tension adjuster" Questions

...seat belt wiring under your front seats, seat belt pre tensioners are related to the srs system and sometimes with seat adjustment these can become loose. The wires are mostly yellow in colour and if ...

Seat Belt repair/replace I can't figure out how to remove the housing that covers the seatbelt without damaging it. Can you help Remove front seat. Remove adjuster cover. A Slide floor anchor cover. ...

adjust the pre tensioner on the seat belt how do i adjust the pre tensioner on the seat belts on a micra as the light keeps flashing on the dash ,many thanks It is not adjustable.

...seat belt tensioner My driver's side seat belt fails to retract fully. The seat belt is integral with the seat with the retraction mechanism in the seat itself. How do I get to the tension ...

...belt to seat. D. Repeat the belt tensioning procedure, set belt tension to 135 lb. click here for picture 1 click here for picture 2 Dont forget to unloosten the 15mm fulcrum bolt in addition to the ...

...belt tension is released. Make sure the belt is correctly seated on all pulleys. Turn the adjustment bolt the other way to bring the component away from the engine and add belt tension. Test the belt ...

...belt covers, and all applicable components. When installing the crankshaft pulley, coat the threads and seating face of the pulley bolt with engine oil, then install and tighten the bolt to 181 ft. ...

...seat the belt. Once the belt is installed, take another look at all the pulleys to double check your installation. Connect the negative battery cable, then start and run the engine to check belt ...

belt tension. Use Rotunda offset belt tension gauge 021-0028A, or equivalent, and following the tool manufacturers instructions, adjust the belt to the following specifications: New belt: 110-132 lbs.

...belt tension, then tighten the adjusting arm and pivot bolts. 3.0L SHO Engine ALTERNATOR BELT See Figure 2 Loosen the nut in the center of the idler pulley. Loosen the idler adjusting screw until the ...