...remove light assembly. The light bulb can be removed from back of the tail light assembly. Check to make sure the lightbulb work before you put the tail light back together. Good luck ...
...holding the light panel to the tail light assembly remove either or and you will have access to the three bulbs on that light panel, replace the burnt one and follow the same intrunctions to put
...remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of ...
Question about Pontiac Sunfire
once the taillamp has been released. Made a video of me changing a brake light but I show how to remove and install the tail light assembly. It's also on a 2005 Hyundai Santa Fe but should be the same
...you'll see two plastic push pin fasteners on the side of the tail light lense. Pull out the center peice of the fasteners and the remove the rest of the faster. Remove the tail light
...tail light assembly or can you just get to the screws to remove the assembly itself. Yes, you have to remove the plastic panel. It is mostly held by spring clips. You can see how to remove it at the ...
...remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in ...
Question about Pontiac Sunfire
...remove the tail light assembly but there appears to be a catch holding the assembly that I cannot find. I have removed the 2 bolts that are accessed when you open the tailgate but cannot get the ...
removing tail light assemble 2005 altima Pop the trunk and remove the carpeting/covering in the rear off of the sides, and you will be able to unscrew the tail light.
981 questions posted
Usually answered in minutes!
987 Questions
731 Questions
696 Questions
696 Questions
688 Questions
