1998 Chevrolet K1500 "timing set" Questions

...SET TIMING ON 1997 5.0 ENGINE IN k1500 TRUCK unplug the relay it should have a black and a tan set of wires, it could be on the fire wall or by te distributor, mark your timing marks on the vibration ...

...set the timing on a 1988 chevy silverado with a 350 small block,tune port injection, and electronic ignition. Thankyou for your help. On that set up the computer mainly sets your timing. It reads the ...

...find the timing scale on the crank pulley. How is the timing set on my truck, and what is it to be set at? Distributor Installation
Just to add, I don't believe your timing is adjustable.

set the timing Okay dude here it is. Sounds like you are off a tooth. the timing is controlled by the computer therefore a timing light will not work because it moves it all the time. what you have to

...set the timing on a 1987scotsdale and for some reason steeing it top dead and plugs and everything are acurate i am getting a screwy timing bounces around and i can't catch it... i pulled the ...

What is the timing supposed to be set at on a 1995 chevrolet k1500 v8 305? bace timing should be set at 0 tdc 5.0L and 5.7l V8 - 1988 through 1995 are to be set at TDC (top dead center)

set the timing timing. pass side under dash brnor tan with black stripe wire, one connector,disconnect it. check engine light will come on. set your timing, reconnect wire. disconnect battery to clear

...Then you disconnect & plug the dist vacuum hose Then you will see the grouve move up on the timing tab as you turn the dist Your setting the initial timing,not 34 on the tab Don't forget ...

...set the timing 2001 astro chey van 4.3 engines need to set the timing don't mark the points. The distributor in that engine can only be installed in one position. The hold down is built onto the ...

...the dist. and then mark the balance with a mark you can see with the engine running and using a timing light check to see where the balance mark lines up on the timing tab. You can see the timing ...