1999 Chevrolet Silverado 1500 "99 check engine oil" Questions

check engine oil level light ''wont go off On my '99 5.3 1500 silverado Ok, start with the obvious, check the oil, and while the truck is running listen under the hood for ticking or clattering noises

99 silverado oil presure problem oil pump in front of engine Had already change the oil pressure switch but gage still reads the same when engine comes to a stop oil pressure drops to red but no ...

...99 Silverado does not like starting when the temp gets below 10 degrees any more than I like going out in that temp and starting it. I have the engine block heater in my truck and I ALWAYS plug it in ...

...99 chevy silverado 1500 4x4? my oil pump is weak and it has a dry start and when i started it this mornin i think it kicked the knock sensor and shut my motor down. i need to know how i can get it to ...

...99 4x4.I put in with everything connected just as the other trans was,but it won't engage any gears.Before I put it in I filled the converter with 1 qt. fluid,was that right or not.Trans is full of ...

...bare metal. I have a 99 Siverado that the message center lights up Check Engine Oil Level even after oil change I live with it Life's Short.One day you'll hit a pothole and it will go out.Good ...

check engine light turning on milage is at 96000, TIME FOR TRANSMISSION FLUID AND FILTER CHANGE. change the fluid and filter and add some trans x One thing I have to say, any-ones get close to 100k on

...99 Ram oil pressure drops to 0 check gauges light. I come to a stop in my 99 Ram. Oil pressure drops to 0, then jumps back up and check gauges light comes on. Start driving, everything is ok. Until I ...

99 olds alero won't start ;engine turns over, has gas,oil -won't fire.tried starting fluid .Have not yet checked coil but are there other possible solutions? Is your security light on? Check for spark

...model number oil filter, spark plugs, and airfilter i need for my 99 gmc denali Go to another spare parts shop and check out their catalogues. Check the numbers on your existing filters and