2002 Pontiac Grand Am "reset change oil light" Questions

reset change oil light I need to know how to reset my change oil light on my 2001 Grand Am SE. I just recently bought this and changed the oil in it and now I need to reset the light, but I don't have

...dashboard? change oil and have mechanic reset it The oil life monitor will have to be manually reset after each oil change. You can find reset procedures here Reset Oil Change Light Procedures How ...

...reset button the change oil light should start to flash, now press and hold the reset button until you hear chimming hold until chimming stops then release, the change oil light should go off. If you ...

...reset the oil change light? 99 grand am se 6cyl That light should reset itself after you changed the oil .If you have changed the oil and it doesn't reset ,try disconnecting the batter for about 5 ...

...reset button. change oil light will flash. press and HOLD reset button again until you hear chimes and the change oil light goes out. it is now reset. as for the trac off light, there is a button on ...

reset the "Change Oil LIght" the procedure is as follows: Turn the ignition to the "ON" position. Press the "RESET" button inside the driver's side fuse panel. The "CHANGE ENGINE OIL" light will flash

...change oil light should start flashing. Turn the key to the off position. The next time you start the vehicle, the light should go on briefly then go out. And if pumping the gas three times does not ...

reset change oil light To reset the system, you must do the following: With the ignition key to ON, push the RESET button located in the driver's side instrument panel fuse block. When the CHANGE OIL ...

...reset the change oil light after changing the oil. It did not go out. Try this and if it does not work let me know. 1. Turn the ignition key to the "ON" position without starting the engine. 2. Fully ...

...reset procedure. Turn the key to OFF. If the CHANGE OIL light comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.There you are, thank you for ...