2004 Pontiac Bonneville "map sensor readings" Questions

...is a map sensor but i dont know about the torque converter circut can someobne help me i am gonna try n save some money and fix it myself if i can find out what these r and how to go about fixingt ...

sensor,map sensor,or fuel module? I have no idea what this car looks like but then iam in europe so what else do you expect but this problem i have come across often but mainly with older the vehicles

...pump must run for two (2) seconds with the key ON There must be a 5 volt reference at sensors like map, TPS Must communicate with scan tool The ORANGE wires at the computer are you power input wires ...

...MAP sensor vacuum hose disconnected or plugged Bad MAP Sensor Bad TPS Damaged or problematic MAP sensor connector Damaged or problematic TPS connector Damaged wiring Short to reference voltage on ...

MAP sensor continually to properly run the engine. Changes in engine load require changes in the amount of fuel injected, and timing of the ignition system, etc. An engine under load has more manifold

MAP sensor continually to properly run the engine. Changes in engine load require changes in the amount of fuel injected, and timing of the ignition system, etc. An engine under load has more manifold

MAP sensor continually to properly run the engine. Changes in engine load require changes in the amount of fuel injected, and timing of the ignition system, etc. An engine under load has more manifold

...MAP sensor vacuum hose disconnected or pluggedBad MAP sensorBad TPSDamaged or problematic MAP sensor connectorDamaged or problematic TPS connectorDamaged wiringShort to reference voltage on signal ...

map sensor value with the key on, engine off. Compare the Barometric reading with the MAP reading. They should be roughly equal. The voltage for the MAP sensor should read approx. 4.5 volts. Now start

...MAP sensor, and a signal wire that informs the PCM of the MAP sensor voltage reading as it changes. The higher the engine vacuum, the lower the voltage reading. The voltage should range between about ...