1995 GMC Jimmy "obd1 jumper scanner" Questions

Ad

...obd1 system, Can I use a jumper to activate the on board diagnostics ? If so, which ones do I jumps? you have a obd2 it has 16 data link connector you have to use scanner to get codes.now the obd1 ...

Ad

Question about GMC Jimmy

1 Answer

without obd1 A 1995 model Buick should be OBD2 which would require a scanner or code reader.  If it is an OBD1 system you can jumper two terminals on the test plug to make the warning light flash

Ad

jumper wire. Just google something to effect of obd1 paper clip method. If there is still no communication once again you more than likely have an issue with your computer or electrical system. If you

...OBD1 cars work like this (or very close) you connect a jumper wire, and the CEL lamp flashes codes. so is the CEL stuck on? running. must come on key on, bad lamp or bad ECU. you can check out Isuzu ...

...OBD1 codes and see if the connector plug looks like yours. If it does you can use a paper clip to jumper two connectors and make the warning light flash. 1994 and 1995 were cross-over years when the ...

how to jump diagnostic on comp 95 buick lesaber not sure what you mean by jumping, ask a auto shop to hook up with an obd1 scanner. refer to the image bleow for jumper points to draw codes.

Question about GMC Jimmy

1 Answer

...obd1 codes on 91 chevy pu i was told i could run a jumper between two terminals to get codes without scanner but which two? under your dash where the ALDL is located the rectangle plug on the drivers ...

...OBD1 system (non standard outside of ford) EEC-IV System uses ford only scan toll $$$$$$$$$ and has blinks codes using a jumper , per the service manual on all fords made with EFI the connector is ...

Question about GMC Jimmy

3 Answers

obd1 I have a 1995 Pontiac with 12-pin ALDL (OBD-I). I was attempting to jump terminal A and B for retrieval of codes, but there is no pin in the B location. There are pins at terminals A, I, and M. I

Question about GMC Jimmy

2 Answers

...jumper wire in the connector under the dash so the service engine light will display the codes I know on a chevy you can jump the 1st row top and bottom connectors together and the service engine ...

Not finding what you are looking for?
1995 GMC Jimmy Logo

991 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...