Question about GMC Suburban
when in drive the engine chugges when at idle ane wants to stall stalls., are complex , what engine? 1994 if dash lamps went out, at stall bad electrical power. never getting engine tuned up, is the ...
won't start new engine no spark replaced engine with new engine new wires new distributer no spark If it turns over fine, check the crankshaft position sensor, and wiring. I have had two no sparks ...
ENGINE SHAKING REAL BAD WHEN IT IDLES MY WATER PUMP WENT OUT WITHOUT ANY WARNING. I NOTICED THE SHAKING THEN. 2 MECHANICS TOLD ME I NEED A NEW ENGINE. IT RUNDS FINE WHEN I GET ON THE FREEEWAY, BUT ...
Question about GMC Suburban
2001 suburban no power what causes the truck to go in to engine power reduce The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission ...
Leaking antifreeze fluid from under the engine. I can't see where it's coming from when looking under the hood but when I look under the engine, I see it leaking onto the ground. It looks as if it's ...
Question about GMC Suburban
2010 chevy 1/2 pick-up 4x4 Check engine light comes on, engine power reduced, and service stabilitrak, traction control off. Since all three systems work together, when the engine light is on the ...
firing order Assuming it is the 5.7L, 350 engine, the firing order is 1-8-4-3-6-5-7-2. GM engines have the firing order cast onto the front of the intake manifold. 1988-95 4.3L Engines Firing Order: 1
Question about GMC Suburban
1999 gmc suburban wont run when engine reaches operating temperature Changed distributor cap and rotor and fuel injectors you could have a bad engine coolant sensor. or if the check engine light is on
Question about GMC Suburban
2002 Suburban_ Engine off but air stays on. When engine is on a/c light stays on & ait stays on even if the fan is turned off If the engine is on and the fan is turned off if you move the temp ...
engine will not stay idling Dirty throttle plates and idle speed control motor can cause stalling without setting check engine light. If your check engine light is on you will have to get the code out
1,320 questions posted
Usually answered in minutes!
273 Questions
225 Questions
157 Questions
68 Questions
73 Questions