2001 Ford Mustang "removing damaged pilot bearing flywheel" Questions

...damaged or missing flywheel housing to block dowels must be replaced. tart clutch pressure plate bolts but do not tighten. Avoid touching clutch disc face, dropping parts or contaminating parts with ...

...pilot bearing, it can damage the clutch hub and the clutch will chatter or shudder when you let the clutch pedal up, and it will shorten the life of the clutch. After the clutch has been aligned then ...

Inspect the flywheel for damage and resurface or replace as necessary. Replace pilot and throwout bearings.  Install new clutch plate.  Install new pressure plate.  Re-install transaxle

...Pilot Bearing (if it needs replaced, you'll need to remove the Flywheel which is held on with six 18mm bolts, drive out the old bearing and drive in the new one, reinstall the flywheel, using ...

...damaged the fingers it rests on to disengage the pressure plate. All clutches are pretty much the same. Flywheel bolts to the rear of the crankshaft with a pilot bearing in the center for the input ...

...pilot bearing which could damage the transmission. There is also a possibility of the spring coming out of the clutch plate and wedging between the flywheel and pressure or clutch plate and causing ...

...pilot bearing on the flywheel, and bolt the pressure plate back into place. Install a new throwout bearing on the clutch fork. remove the alignment tool. 8. install the bellhousing, connecting the ...

...damaged or scratched and the spline lube was nicely showing on the transmission spline, indicating it had mated. I took off the starter as well to ensure it was not interfering with the starter ring ...

...pilot bearing,funny that. a real service manual is far better. slave to fork lever to above damage, at T/o bearing trans mission pilot shaft tip wrecked, or spline wrecked? or you wiggle said shaft ...

...pilot bearing. If it is worn or damaged and does not turn easily by hand, remove it using a puller/slide hammer. Check the flywheel surface for scoring, cracks or burning and machine or replace, as ...