1993 GMC Suburban "starter" Questions

Ad

Installed a starter on my 1994 chevy suburban, accidently pinched the starter wire between the starter and block now I don't have power to the starter or dash lights, fuses checked good wire is fi

Ad

how do you no when you need a starter I am assuming the truck will not start.You can try hitting starter with a hammer while someone holds the ignition switch in the crank position, if it cranks then ...

Ad

Question about GMC Suburban

2 Answers

.... the battery is fully charged, and the cables are all clean and tight... the solenoid on the starter is probably bad. if you have a test switch, you can test it by jumping across the starter ...

put new starter in, now when i reconnect the negative cable the car tries to start without turning the key. help Hi, Disconnect the small terminal to the starter solenoid and reconnect the main ...

Why does the starter stay engaged on my 99 Chevy suburban when I use the remote start Check the batteries. If remote is the one that came with it. could be wore out. could be an issue with the remote ...

How do you replace the starter on a 1989 SW1500? How do you replace the starter on a 1989 suburban SW1500 350 cid? The following is a general procedure for all trucks covered in this manual, and may ...

Question about GMC Suburban

2 Answers

starters grinding I have a 1996 chevy suburban with 5.7L auto and 4x4. I have replaced the starter and checked out the flywheel which has some slight wear on it but no missing teeth. Will slight wear ...

Question about GMC Suburban

2 Answers

My husband just replaced the starter in our k2500 suburban, when he connected the battery the truck starts by itself, no key in ignition either, any suggestions, did we get a defective starter? He has

how do u change, the battery cables(wires that connections from the battery to the starter) If you're confident that you're able to change the starter yourself, read on! You should check several other

Question about GMC Suburban

2 Answers

1996 chevrolet suburban hello, need to find where the starter solenoid is, please? The starter solenoid is connected to the starter. You will have to remove the starter and the solenoid the housing ...

Not finding what you are looking for?
1993 GMC Suburban Logo

241 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Suburban
1999 GMC Suburban

921 Questions

1995 GMC Suburban
1995 GMC Suburban

273 Questions

1994 GMC Suburban
1994 GMC Suburban

225 Questions

1992 GMC Suburban
1992 GMC Suburban

68 Questions

1990 GMC Suburban
1990 GMC Suburban

73 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...