1996 GMC Jimmy "crank start" Questions

I had my daugher's Jimmy sit for a few month and when I went to start it, I got a few week cranks and nthen nothing. I tried jumping it, but no luck. decided the battery needed to be replaced. Battery

...crank as long as you hold the key but not start? If cranking okey,check fuel pressure,key -on,cranking,or if it does start. Check battery cables for corrosion,also inside cables. Do,a voltage drop ...

...u again, changed relays, no crank, can hear pump running in tank ,still no crank, but could start tomorrow fine, until ur stranded again . need help. if it's not a battery problem. Replace your ...

...crank but no start then look at the ignition system. Check for spark at the plugs and also check the fuel pressure. If there is spark try spraying a little starting fluid into the intake. See if it ...

crank but won't start . it sound like it want to turn over but something is stopping it. First you need to check fuel pressure, this is very important with this fuel system, the press. should be 55-62

...CRANK SENSOR, AND IT STILL WILL NOT START. THE LIGHTS & RADIO WORK. IT CRANKS BUT WILL NOT START. I had this problem with my 97 Jimmy. It is your ignition switch. The switch that touches the tumbler ...

start until cold crank for 15 seconds I have to crank for 15 seconds ( +/- ) before it fires. New; fuel pump relay, fuel filer & battery. If I stop cranking anytime in that 15 seconds and turn the

...crank but will not start. Last week we had a code reader on it and it gave us a few codes, one of them being the crank shaft positioning sensor. Could it keep the truck from starting? Yes, the crank ...

...start on its own? The fuse marked "Crank" is usually a 10 amp fuse used for the starter enable relay circuit and the pass-key decoder module, and the starter motor should not function without that ...

...CRANK WILL NOT START HELP hello, i have seen a couple jobs like yours, i have found as well as GM that the fuel pump ground can be bad, try to remove ground and reposition on clean steel, no paint , ...