1999 GMC Jimmy "crank position sensor" Questions

Ad

Question about GMC Jimmy

1 Answer

where is the cam shaft position sensor located on a 2001 gmc 5.7 , and also the crank position sensor? If this is a 5.7L the cam sensor is in the distributer and the crank sensor is in the timing ...

Ad

Question about GMC Jimmy

1 Answer

crank shaft position sensor tells the engine when to send fuel and spark to the cylinders in conjunction with the camshaft position sensor. If the crank sensor isn't working properly, the engine doesn

Ad

Where are the crank shaft position sensor on thte motor? crank shaft position sensor is located on the bottom of the timing cover passenger side right behind the crankshaft pulley

...crank sensor requires a posible adjustment, this deals with your timing, sooooooo, sensor may need adjusted, re-read instructions, this sensor sends info to the ECM, apparently its sending bad info, ...

...have a broken timing chain. If it is turning and there is no spark, it is probably bad spark plug wires, spark plugs, distributor cap, rotor, camshaft position sensor, or crankshaft position

Question about GMC Jimmy

1 Answer

...that is the most likely culprit. its a 4.3 vortec 4x4 slt model if that helps. Hello jerryparker6, The image below shows the location of the crank position sensor. I hope this helps. Regards, ...

...and no fuel I'd look at the crank angle sensor. This detects the motor position and the ecu fires the plugs and injectors respectivly. Is there fuel pressure at the injector rail or no fuel at

...It sounds like the Crankshaft Position Sensor or CPS is going bad. Eventually it will stall and not restart. It may be getting hot and causing it not to read where the crank is at. Good

...Crank position sensor, TPS sensor, Coil Pack, Vacuum leaks. Even something as simple as good clean battery connections,, If your cables are corroded and covered with oxidation clean with soda water ...

crank back up but wouldnt run far until it cut off again. i put a new fuel pump, fuel filter, throttle position sensor, and relay on it. It will run now as long as you keep your foot on the gas. If it

Not finding what you are looking for?
1999 GMC Jimmy Logo

1,580 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,100 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,105 Questions

2001 GMC Jimmy
2001 GMC Jimmy

819 Questions

1996 GMC Jimmy
1996 GMC Jimmy

756 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...