2000 Dodge Durango "replace belt tensioner 1997" Questions

Ad

...belt tensioner & a new belt. It stopped for a day but is back. Also during this annoying encounter, on a cold start before I replaced the above mentioned parts it would stall in the parking position. ...

Ad

...procedure on a 1997 nissan sentra gxe you must locate the belt pulley tensioner and loosen it until you can remove the belt, after you remove replace belt and then tighten tensioner until belt is ...

Ad

...replace Install Serpentine Belt tensioner 1996 98 Buick Lesabre... These two videos will help you get the job done. Good Luck !!! Remove the serpentine belt (inspect to determine if it also needs ...

replace serpentine belt on 1997 Ford 4.6 liter e What tool is required to release the tension on the belt. The diagram on the 1997 Ford F250 shows a square hole in the tensioner, but it is not square.

Question about Dodge Durango

1 Answer

Belt tensioner Have a 1997 ford taurus sw, 3.0 v6. replaced the tensioner abnd now there is slack in the belt. Is there a certain way that the tensioner goes back on in order to get tension on the ...

...replace the belt while you are at it. put the same long wrench back on the tensioner, move it back, put the belt on, release the tensioner, put the wheel back on and you are in business. i am sure ...

...the belt. 5. Remove the belt. 6. Replace the belt. 7. Tension the belt using the adjustment on the belt tension adjuster. 8. Drive around and steer, easily. Enjoy. -Jackson

...belt tensioner. Comes out easily, once you figure out access to it. Remove inspection panel inside front passenger side wheel well. Tensioner is right there, two bolts. If the spring gets weak, the ...

...es300 Hi, you will find the tensioner position and belt replacement instructions at this site:http://www.ehow.com/how_6362247_replace-serpentine-belt-lexus-es300.htmlPlease remember to to ...

Question about Dodge Durango

1 Answer

...replace tensioner the tensioner is under the belt remove the belt first and then you remove the tensioner and after you install the tensioner use the tensioner to reinstall the belt be sure to take ...

Not finding what you are looking for?
2000 Dodge Durango Logo

2,438 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

2001 Dodge Durango
2001 Dodge Durango

1,378 Questions

2002 Dodge Durango
2002 Dodge Durango

886 Questions

2004 Dodge Durango
2004 Dodge Durango

1,005 Questions

2003 Dodge Durango
2003 Dodge Durango

766 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...