2005 GMC Sierra Denali "install blower resistor" Questions

Ad

...Install the blower motor resistor assembly. Install the rear screw and tighten the forward screws. Connect the electrical connectors to the blower motor and resistor assembly. Install the insulator ...

Ad

Question about GMC Denali

1 Answer

Install the blower motor resistor or controller to the heater AC housing. The housing is indexed to allow (controller power module) mounting in only one position. Tighten the mounting screws to 2.2 Nm

Ad

...blower motor resistor block into the HVAC housing. 2. Install the two screws that secure the resistor block to the HVAC housing. Tighten the screws to 2.2 Nm (20 in. lbs.) 3. Connect the wire harness ...

Question about GMC Denali

2 Answers

...Install the blower resistor. Install the blower resistor screws. Tighten the screws. Replace the portion of the dash mat that you cut during the removal procedure. Connect the electrical connections ...

Question about GMC Denali

2 Answers

Install the blower motor resistor. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement

...blower motor resistor removal/installation) To Install: CAUTION Do not bend the resistor coils or allow them to touch each other. Install the resistor in the plenum. Tighten the mounting screws to 12 ...

...Install the blower motor resistor to the cowl plenum panel by feeding the resistor and wire harness back through the cowl plenum access hole. Install and tighten the two screws that secure the ...

...install a new blower moter and a new blower resistor it's work a few weeks and the resistor fail. The blower motor blows on high only. you can get a new resistor and you have to start the blower ...

...the instrument panel. Disconnect the blower motor resistor electrical connector. Remove the 2 blower motor resistor screws. Remove the blower motor resistor. To install, reverse the removal

Install the blower motor resistor or controller to the heater AC housing. The housing is indexed to allow (controller power module) mounting in only one position. Tighten the mounting screws to 2.2 Nm

Not finding what you are looking for?
Cars & Trucks Logo

71 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...