Reset the oil life monitor when the oil has been changed, use the following procedure: Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds.
...reset this 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 ...
...reset it. Good Luck and have a good XMASS. P2138 - Accelerator Pedal Position Sensor Circuit Range / Performance Problem The following can cause the code P2138: ●Harness or connector (APP ...
Question about Ford Cars & Trucks
...accelerator and brake pedals. 7. The Service: Oil reset complete message will no longer be displayed. 8. Rotate the key to the off position. For vehicles with push-button start, press the START/STOP ...
...reset this indicator light by turning the key to the on position, and then pushing the accelerator pedal to the floor three times within five seconds. The light should start blinking and then go out. ...
reset on 2002 Denali Hello: Try this, Key on engine off Check for flor mat(s) under accelerator pedal, depress accelerator pedal all the way to floor 3 times within 5 seconds. Hello. In order to reset
...the system did not reset. Repeat the procedure if the system does not reset. If it does not work using the accelerator pedal, go under the hood and move the linkage manually to reset the ...
Question about GMC Sierra 1500
...reset procedure - MY350Z.COM Apr 14, 2017 Accelerator Pedal Position Sensor - MY350Z.COM Apr 14, 2017 More results from my350z.com Try this 350z Reset proceedure (Pedal Dance) Horsham Developments ...
...accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. ...
317 questions posted
Usually answered in minutes!
187 Questions
177 Questions
34 Questions
33 Questions
13 Questions
