...clutch pedal will not return from it's depressed position...the dot 3 fluid level in the master cylinder o.k. ans there are no leaks from either the hose or slave cylinder. Replace both clutch slave ...
...clutch pedal can be adjusted inside the truck under the dash. You need a 10mm and a 12mm open wrenches to make the adjustments.there is a 3-4 inch threaded rod that you loosen the 12mm lock nut then ...
...//i253.photobucket.com/albums/hh43/chuck943/M1601026.jpg Here is a pic of the system. 1. Brake master cylinder reservoir 2.Clutch master cylinder 3.Clutch slave cylinder with integrated release ...
Question about Mazda B2200
...clutch master cylinder. The fill reservoir is along the firewall on drivers side with a black cap. It uses DOT 3 brake fluid. Add fluid if low and pump pedal. If low you have a leak. If full you have ...
...3 times and top up m/cylinder. pedal should be ok. Let me know how you get on. Ron check the clutch fluid level, if its low to the bottom, the slave cylinder may be leaking and the trans will have to ...
...3 brake fluid that you use for your brake master cylinder, and make sure that you are pouring the fluid into the clutch master cylinder reservoir and not the rubber seal that should be under the fill ...
...3 brake fluid and open the bleeder on the slave cylinder until fluid starts dripping out. Then tighten bleeder then open bleeder and have someone push down on clutch pedal while the pedal is pushed ...
Question about Dodge Cars & Trucks
clutch slave cylinder fill tank, this will be very small vs the brake master cylinder, but it will be close to the brake master cylinder. And it even takes the same fluid as the brake master cylinder.
...only temporarily.The clutch master cylinder and reservoir is bolted to the firewall,driver side,and should have a round black cap.The system uses regular DOT 2 or 3 brake fluid for the ...
Question about Mazda B2200
top of your clutch peddle. check the fluid level in the master cylinder first and formost to see if you are just simply low on fluid if you are then DOT 3 brake fluid works perfectly fine for it.
546 questions posted
Usually answered in minutes!
738 Questions
692 Questions
544 Questions
609 Questions
615 Questions