1993 Chevrolet S-10 "engine dies put reverse chevy" Questions

...engine circuits. This is real suspect. WD 40 them also my 99 chevy s-10 also dies while driving. the voltage meter in the dash will start to fausuate. it slowly starts to drop to the left, then it ...

dies. ( does anyone know where i can find a 2barrel carb and intake to put on my 2.5l, i want to get rid of the TBI system) i have a problem with my chevy s10 it turns on and every thing but it watses

put back together, we ran across a very screwy issue. Brake lights work when the lights are not engaged, Reverse turns on the brake lights, the emergency flashers cause the flashers to engage, as well

...engine idles fine, but dies sometimes while driving, but mostly when i put it into drive or into reverse. no roughness or misfiring, it just dies Could be a dirty throttle body or faulty idle air ...

...engine dies. If you put it right back in park then it idles and rev's just fine. what would cause this? Bad lock-up solenoid (TCC) in trans you have a timing problem check it you may need to replace ...

...put it in drive and gave it bout half gas and very low accell and high rpm sounds like i should be goin fast Check your fuel pressure it should be 60-66 psi with key on engine off.If its not within ...

...dies when i put it reverse are drive does that mean it is out of time and the rear drivers side wheel locks up when goin in reverse what does that mean You either have a bad Idle air control valve or ...

...put a rebuilt engine in two months ago and has been fine until now, any ideas? Sounds Like you lost the front pump in the trans. Onley way to confirm is by checking chking the pressures at the trans. ...

Engine shakes whole car My 1999 chevy lumina shakes when put into drive and reverse. in park and nutral it seems to not do it. i have no check engine lights on. in the last month i have replased a ...

...dies out. I had a certified mechanic check the diagnostics and it showed that the vehicle does not need a tune up. He ascertained that the problem had to do with the transmission. He said that after ...