1993 Chevrolet S-10 "remove flywheels" Questions

how do i remove a starter from a 1994 s10 pick up with a 4.3 v6 <0001> Disconnect negative battery cable. Raise and suppor t vehicle. Disconnect electrical wiring from starte r solenoid. Remove ...

noise coming from flywheel. does not make noise in reverse. torque converter bolts tight. could have a cracked fly wheel,,or a bad torq converter, Could be a cracked flywheel, no way to tell without ...

...A Chevy s10 4x4 engine 4.3 Get yourself a service manual. first secure the vehicle on Jack stands remove both drive shafts disconnect linkage from transfer case unhook wiring from transfer case, if ...

grinding when starting, replaced starter one month ago engages well sometimes, but now will not engage flywheel could the flywheel teeth be worn or broken? The flywheel is worn in that specific area. ...

How do you replace rear main oil seal on '93 Chevy S-10 pickup? Remove trans, remove flywheel, remove and replace seal.

...mounting bolts. If equipped, note the location of the shims. This will help during reassembly. Remove the starter motor and if equipped, the shims. To install: Place the starter motor into ...

...Manual transmission. place transmission in gear and rock the vehicle to manually turn the engine. Remove starter and inspect pinion and ...

I have a 1995 Chevy S10 4.6L 2WD Ext Cab truck. Just replaced the transmission and have bled the system. I started the engine and I cannot shift into first gear without grinding the gears. Any ...

how do i remove my starter on a 1987 chevy Two mounting bolts. Two wire terminals. Disconnect battery first for safety. You may need to remove exhaust manifold or something to get at it. The starter ...

...find an access hole covered with a black plastic plug. The hole should be roughly 2-3" in size. Remove this cover and manually rotate the flywheel using the accessory drive pulle bolt or have ...